8
2.1 Adjustment of clutch cable. (Drawing 2 and Drawing 3)
2.2 Adjustment of reverse cable.
2.3 Adjusting of throttle cable. (Drawing 4)
Throttle cable
Flameout cable
Clutch arm
Reverse clutch fork
Reverse cable
Reverse cable
Drawing 3
1. Loose locked nut.
2. Deasil turn bolt into shortest.
3. Put cable head into clutch cable seat of transmission box, and make sure that cable head is
in the big hole.
4. Put steel wire into M8 hole of clutch arm seat, press clutch arm fork, and hang cable head on
clutch cable seat.
5. Turn off Bolt, and hold it tightly. Loose clutch handle until spring in clutch can return handle,
and then locked nut.
1. Loose locked nut.
2. Deasil turn bolt into shortest.
3. Put cable head into clutch cable seat of transmission box, and make sure that cable head is
in the big hole.
4. Anticlockwise turn reverse fork axle, and put cable through narrow slot, and make sure head
into big hole of seat.
5. Turn off Bolt, and hold it tightly. Loose reverse handle until spring in clutch can return handle,
and then locked nut.
1. Turn throttle switch into max.
2. Put steel wire of throttle cable through wire seat and fixed seat which is on control panel.
3. Tight steel wire, locked screw on locked seat
4. Adjust fuel switch some time, until fuel rod on control panel into max.
