13
5. Using notice
!NOTE:
• When working on tiller, take care if any strange noise. If strange noise, stop engine to check.
• When tiller is cool, don’t add heavy load. Especially new machine and machine which is after
big repaired.
• Take care oil in transmission box, if no oil, add.
• Not allowed to pure water to cool down tiller.
• When working on tiller, don’t let tiller falling down.
• Don’t allowed tiller with blades walking on hard road.
• After using, clean tiller, will prolong using life of tiller.
• Often clean air cleaner element, and change it when need.
3 Attentions of Operating Engine:
1. BREAK-INOFNEWENGINE :
If your engine has not breaking in yet, improper usage will shorten the life of engine. the initial
20 hrs is the break-in-period. The operator mustobey the following items :
2. RUNNING IN FOR 5 MINS AFTER FIRST START.
Running with low speed and low load before the engine gets hot. Avoid running with high speed
and full load, or low speed and no load.
3. AVOID RUNNING WITH OVER LOAD.
During break-in period, the engine can't run with full load, but can run with 3000rpm and 50%
load.
4. CHANGE ENGINE OIL REGULARLY.
After working for 20hrs, change the oil when engine is still warm, otherwise it will be difficult to
drain the residual oil in the engine.
IX. Oil Bath TypeAir Filter:
1. Check the oil level before operating.
2. Fill oil upto upper limit. If oil is dirty, change it. Please use diesel to cleanoil bath element
frequently, then dip the element in the oil and squeezeout extra.
Running
WARNING
• Be sure to operate the engine in a good ventilated place in order to avoid exhaust poisoning.
• Avoid letting hands, body & clothes entangle in output shaft, belt pulley, V-type belt pulley
and other moving parts, so as to prevent from getting injured.
• Stop the engine first and then maintain the movable parts and other parts around it. Make
sure there are no tools and sundries in the body of the engine before operating.
