19
! NOTICE:
(1) Check more frequently when tiller works in heavy dust circumstance.
(2) If users neither have special tools nor know mechanical knowledge well, these maintenance
should be done by dealers.
1. Change oil
Drain out oil when engine is warm.
Screw down drain bolt and loosen oilfiller cap. Refill with recommended oil and check oil level.
(Drawing 7)
OIL CAPACITY : 0.6L
Drain Bolt
Oil Filler Cap
Drawing 7
2. Air cleaner maintenance
A dirty air cleaner will restrict air flowing into the carburetor. Check the carburetor regularly to
prevent carburetor malfunction. Check and clean it more often if tiller works in heavy dirt area.
WARNING Never use gasoline or low flash point solvent to clean air cleaner element. Or it may
burnt or explode.
! NOTICE: Never run engine without air cleaner. Impurity will directly come into engine and speed
up wearing..
1. Take off butterfly nut and plate, and then take out element.
2. Wash element in warm suds or high flash point solvent. Then naturally air-dry it. Dip it with
farthing oil, and squeeze it to make it equably wettish. Engine may exhaust heavy smoke if it
is dipped with too much oil.
3. Pour the oil in box, clean the box, and let it dry.
4. Add recommend oil into box.
5. Put back air cleaner element and plate.
