11
Drawing 5
Flameout switch
Clutch rod
Lock clip
Drawing 6
3. Operate
! NOTE: Tiller should be break-in before using, according to introduction of SECTION N
Drawing A Start place Drawing B Stop place
3.1 Using of flameout switch
3.1.1 Start: Turn flameout switch to the place as drawing A, and use lock clip to block switch.
And start engine according to SECTION FOUR/◆3/1.
3.1.2 Work: When work, hold flameout switch. Turn lock clip back. And hold on clutch rod can
change gear. Then hold on flameout switch, and release clutch rod can do tilling work.
3.1.3 When meet emergency situation, release flameout switch, engine will stop.
!WARNING: When tilling or walking, can’t turn lock clip as Drawing A show.
3.2 Slow gear
3.2.1 Left hand hold on clutch rod, and meanwhile press down flameout switch to disengage
clutch.
3.2.2 Right hand pull back shift gear rod, and then turn to slow gear. After shift gear, use right
hand to hold handle grip.
!NOTE: When this step, don’t hold reverse handle.
