10
1.2 Check if all rod (Oil, clutch, reverse, gear shift) are flexible, and adjust them well.
1.3 Turn gear shift rod into natural.
1.4 Add oil
1. Add SAE10W-40 into crank case of engine, drawing 8.
2. Add Nr.20 oil into transmission box. Put tiller horizontal, take off oil ruler. And add oil through
transmission box filling hole. And insert oil ruler to check oil level. If oil level is between up
limit and low limit, turn off oil ruler. (Drawing 5)
3. Add oil to air cleaner.
4. According to working condition choose different oil. (Drawing 6)
! NOTE: Gear shift rod must be at natural place.
Up limit
Low limit
Drawing 8
2. Start
Start engine according to introduction of engine operation.
Engine should work at idling speed (1450-1750r/min) for two or three minutes.
Check if engine work right, if not, stop to check.
