9
FIGURE 8
13. Flip the cart over so that it rests on its wheels.
14. Assemble the front tongue on top of the rear tongue
using three 3/8" x 3" hex bolts, 3/8" lock washers and
3/8" hex lock nuts. See figure 8.
HINT:
For easier assembly, support the rear tongue
with a block of wood.
15. Assemble the hitch bracket to the front tongue using
two 3/8" x 1-1/4" hex bolts, 3/8" lock washers and 3/8"
hex lock nuts.
Tighten.
See figure 9.
16. Secure the hitch pin to the hitch bracket and tongue
with the hair cotter pin. See figure 9.
FIGURE 10
HITCH BRACKET
3/8" x 1-1/4"
HEX BOLT
3/8" LOCK
WASHER
3/8" HEX
LOCK NUT
TONGUE
HITCH
PIN
HAIR
COTTER
PIN
FIGURE 9
17. Release the latch lock lever and tilt the cart bed back.
See figure 10.
18. Assemble the front panel to the cart bed, sliding the
bottom lip of the panel in between the cart bed and
the latch stand bracket. Fasten the panel to the
bottom and sides of the cart bed using six 1/4" x 5/8"
hex bolts, 1/4" lockwashers and 1/4" hex nuts.
Tighten.
See figure 10.
19.
Tighten
the two bolts that you assembled to the latch
stand bracket in figure 5.
TONGUE
(FRONT)
3/8" x 3"
HEX BOLT
3/8" LOCK
WASHER
BLOCK
3/8" HEX
LOCK NUT
ASSEMBLING VAC PARTS
1/4" x 5/8"
HEX BOLT
FRONT
PANEL
1/4" HEX NUT
1/4" x 5/8"
HEX BOLT
1/4" HEX NUT
LATCH
STAND
BRACKET
1/4" LOCKWASHER
1/4" LOCKWASHER
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
