15
FOR 1990 AND NEWER MURRAY
TRACTORS WITH A 38" OR 40" DECK
1. Cut out two templates and place on deck adapter as
shown in figure 29. Tape smaller one on top and
larger one on the side and bottom. After they are in
place, carefully mark around the templates, then cut
out adapter to obtain correct opening.
2. Bolt end of mounting strap to the 5/16" bolt on the
mower deck. The other end of the strap will bolt to a
hole in the deck adapter, which must be drilled.
Position the adapter on the deck, then drill a 5/16"
hole in the bottom of the adapter that will align with
the hole in the strap. Fasten the adapter to the strap
using a 1/4" x 3/4" hex bolt, 1/4" flat washer, nylon
washer and 1/4" hex nut. See figure 29.
3. Assemble end of hose and hose clamp over the
round opening of deck adapter and tighten clamp.
GO DIRECTLY TO THE OPERATION INSTRUC-
TIONS WHICH ARE LOCATED ON PAGE 16.
FIGURE 29
4. Assemble end of hose and hose clamp over the round
opening of deck adapter and tighten clamp.
GO
DIRECTLY TO THE OPERATION INSTRUCTIONS
WHICH ARE LOCATED ON PAGE 16.
1. Tape 46" template onto deck adapter. Mark and then
cut out adapter .
2. Fasten the angle bracket and the mounting bracket to
the mower deck as shown in figure 30. Use two 5/16"
x 3/4" carriage bolts, 5/16" flat washers and 5/16"
lock nuts. The bolt heads go on inside of mower
deck.
3. Drill two 5/16" diameter holes in the deck adapter that
will align with the holes in the angle bracket and the
mounting bracket. Assemble the deck adapter to both
brackets using two 1/4" x 3/4" hex bolts, 1/4" flat
washers, nylon washers and 1/4" lock nuts. See
figure 30.
FIGURE 30
FOR 1990 AND NEWER MURRAY
TRACTORS WITH A 46" DECK
1/4" LOCK NUT
1/4" LOCK NUT
ANGLE BRACKET
NYLON WASHER
LOCATE AND
DRILL HOLES
1/4" x 3/4"
HEX BOLT
1/4" x 3/4" HEX BOLT
NYLON WASHER
1/4" FLAT WASHER
NYLON WASHER
1/4" FLAT WASHER
MOUNTING
BRACKET
MOUNTING
BRACKET
1/4" FLAT
WASHER
1/4" FLAT
WASHER
1/4" x 3/4" HEX BOLT
1/4" FLAT WASHER
NYLON WASHER
1/4" LOCK NUT
MOUNTING STRAP
BOLT THIS END OF
STRAP TO 5/16" BOLT
ON MOWER DECK
38"/40" TEMPLATE
CUT OUT SLOT IN TOP
OF DECK ADAPTER
TEMPLATE TO CUT OUT SLOT
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
