Agri-Fab 501885, Owner'S Manual

Page: 12 / 24

12
33. Assemble the hose adapter (nozzle) to the front of
the impeller housing and secure with the three knobs.
Make sure that the switch actuator bracket contacts
the switch on the housing. See figure 19.
FIGURE 22
36. Place the hose hanger rod assembly into the hose
hanger bracket on the impeller housing assembly.
See figure 21.
37. Loop the 25" tarp strap under the hose. Fasten the
hooks to the hose hanger rod assembly. See figure
21.
FIGURE 20
34. Place a hose clamp onto end of hose. Push hose
onto hose adapter (nozzle). Tighten hose clamp onto
hose and hose adapter.
Do not collapse hose
adapter when tightening clamp. See figure 20.
35. The remaining hose clamp will later be used to fasten
the other end of the hose to the deck adapter.
FIGURE 19
HOSE ADAPTER
(NOZZLE)
KNOB
SWITCH
ACTUATOR
BRACKET
38. Assemble the hitch plate to the tractor hitch if:
a. Your tractor has a square (straight) hitch frame,
to help prevent binding.
b. Your tractor has a lightweight hitch frame that
needs reinforcing for towing the Mow-N-Vac.
Use a 1/2" x 1-1/4" hex bolt, a 7/16" flat washer and a
1/2" hex lock nut. See figure 22.
FIGURE 21
HOSE ADAPTER
(NOZZLE)
CLAMP CLAMP
HOSE
HOSE HANGER
ASSEMBLY
25" TARP
STRAP
TRACTOR
HITCH FRAME
(SQUARE)
HITCH
PLATE
TRACTOR
HITCH FRAME
(TAPERED)
1/2" x 1-1/4"
HEX BOLT
7/16" FLAT WASHER
1/2" HEX LOCK NUT
ATTACH
MOW-N-VAC
HERE
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com