AGM Global Vision ANACONDA Series, User Manual

Page: 29 / 40

29 Anaconda
USER MANUAL
3 MAINTENANCE INSTRUCTIONS
3.1 OPERATOR TROUBLESHOOTING
The purpose of troubleshooting is to identify the most frequent equipment malfunctions, probable
causes, and corrective actions required.
Table 3-1 lists the common malfunctions that may be found during the operation or maintenance
of the Anaconda. Perform the tests/inspections and corrective actions in the order listed.
This table does not list all of the malfunctions that may occur with your device, or all of the tests
and corrective actions that may be necessary. If you experience an equipment malfunction that
is not listed, or is not fixed by the corrective actions listed in the table, please contact Customer
Service center.
TABLE 3-1. OPERATOR TROUBLESHOOTING
MALFUNCTION
PROBABLE CAUSE/ TEST/
INSPECTION
CORRECTIVE ACTION
The Anaconda
fails to activate.
Batteries are missing or
improperly installed.
Insert batteries or install correctly.
Batteries are dead. Replace the batteries.
Batteries, surfaces, or contacts
are dirty or corroded.
Clean the contact surfaces with a pencil
eraser and/or alcohol and cotton swabs.
Remote control unit is
damaged.
Please contact Customer Support.
Remote control battery is dead. Replace the battery as per Part 3.2.4.
The equipment is damaged. Please contact Customer Support.
The Anaconda is
not responsive
to control
buttons.
The equipment is damaged. Please contact Customer Support.
Remote control
does not work.
Battery is missing or improperly
installed.
Insert battery or install correctly.
Battery is dead. Replace the battery.
Battery surfaces or contacts
are dirty or corroded.
Clean the contact surfaces with a pencil
eraser and/or alcohol and cotton swabs.
Remote control unit is
damaged.
Please contact Customer Support.