30
AGM Global Vision
MALFUNCTION
PROBABLE CAUSE/ TEST/
INSPECTION
CORRECTIVE ACTION
Poor image
quality.
Check objective lens focus.
Refocus.
Check for fogging or dirt on
objective lens and output lens.
Clean the lenses as detailed in Part
3.2.2.
The equipment is damaged.
Please contact Customer Support.
No image on an
external monitor.
Video cable is damaged.
Replace the video cable with a new one.
Please contact Customer Support.
The equipment is damaged.
Please contact Customer Support.
Hindered
rotation of the
battery cap.
Dirty cap thread.
Clean the thread.
Damaged cap thread.
Replace the cap with a new one. Please
contact Customer Support.
Light is visible
around light
suppressor.
Check suppressor resilience.
If the suppressor is defective, please
contact Customer Support.
3.2 MAINTENANCE
3.2.1 GENERAL
The Anaconda operator maintenance consists of operational tests, inspections for unit
serviceability, cleaning and mounting procedures, corrective actions (troubleshooting and
replacement of a limited number of parts). Maintenance instructions covered elsewhere in this
manual (PMCS, troubleshooting, etc.) are not repeated in this section.
CAUTION:
The Anaconda is a precision electro-optical instrument and must be handled carefully at all times
to prevent damage.
CAUTION:
DO NOT dismantle the equipment.
3.2.2 CLEANING PROCEDURES
Clean the Anaconda and optional items as follows:
1. Gently brush off any dirt from the equipment using only a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe the external surfaces (except for optical
surfaces).
3. Dry any wet surfaces (except for optical surfaces) with another clean, dry soft cloth.
4. Using a lens brush, carefully remove all loose dirt from optical surfaces (objective lens and
output lens).
Summary of Contents for ANACONDA Series
Page 1: ...USER MANUAL ANACONDA THERMAL IMAGING CLIP ON SYSTEM...
Page 39: ......
