AGM Global Vision ANACONDA Series, User Manual

Page: 18 / 40

18 AGM Global Vision
Use the video cable plug (B) to connect an external power source (6 VDC / 600 mA) to the
Anaconda. Connect the video cable plug (C) to the Anaconda S620 universal connector.
NOTE:
The external power supply must have a standard OD double-pole socket with a positive central
contact.
CAUTION:
After removing the cable, replace the protective cap over the connector.
2.2 CONTROLS AND DISPLAY INDICATIONS
2.2.1 CONTROLS
CAUTION:
DO NOT force the equipment controls past their stopping points.
The Anaconda controls are shown in Figures 2-13 and 2-14, and are defined in Tables 2-1 and 2-2.
The ITEM NO. columns indicate the numbers used to identify items in the figures.
NOTE:
Various display symbols indicating the current operating state of the Anaconda can be displayed
permanently, may appear momentarily, or can be set to appear only when a certain function is
activated.
A
B
FIGURE 2-12. VIDEO CABLE
C
2
1
3
4
FIGURE 2-13. CONTROLS