AGM Global Vision ANACONDA Series, User Manual

Page: 14 / 40

14 AGM Global Vision
5. Affix the Anaconda to the rail by locking the cam lever (C, see Figure 2-4).
6. Verify that the clamping device is firmly secured to the Anaconda. If necessary, adjust the
clamping device as detailed in Part 2.1.3 (Clamping Device Adjustment).
2.1.3 CLAMPING DEVICE ADJUSTMENT
To adjust the mount’s clamping device, do the following (refer to Figure 2-5):
1. Unlock the clamping device and remove the Anaconda from the weapon.
2. To tighten/loosen the clamping device (B), push the cam (C) towards the arrow, which will cause
the nut (A) to slide out of its hole. Turn the nut (A) CW/CCW respectively, in one-two increments
(see note below). Backward-moving springs will cause the nut (A) to slide back into the hole.
NOTE:
The eight-sided nut of the clamping device will only fit into the hole if turned in one of the discrete
positions using increments equal to 360°/8.
3. Verify that the adjusted clamping device is firmly secured to the Anaconda.
FIGURE 2-4. MOUNT. TOP VIEW
C
B
LOCKED POSITION UNLOCK POSITION
A
FIGURE 2-5. MOUNT. UNDERSIDE VIEW
LOCKED POSITION UNLOCK POSITION
A
B
C