AGM Global Vision ANACONDA Series, User Manual

Page: 12 / 40

12 AGM Global Vision
2 OPERATING INSTRUCTIONS
2.1 INSTALLATION AND MOUNTING
2.1.1 BATTERY INSTALLATION
CAUTION:
Verify that the equipment is off before installing a battery.
Install two CR123A batteries as follows (refer to Figure 2-1):
1. Unscrew the battery cap (A).
2. Remove the battery cassette (B).
3. Insert the batteries (C) into the cassette. Align the polarity symbols on the batteries with the
polarity symbols on the cassette.
4. Reinsert the cassette with installed batteries.
5. Replace the battery cap.
2.1.2 INSTALLING THE ANACONDA ON A PICATINNY/WEAVER RAIL
WARNING:
Always make sure your firearm is unloaded before you place the equipment on the firearm.
Always verify that the chamber is empty, especially if you stop the procedure and resume later.
Safe handling rules should be followed at all times.
FIGURE 2-1. BATTERY INSTALLATION
A
B
C