AGM Global Vision ANACONDA Series, User Manual

Page: 23 / 40

23 Anaconda
USER MANUAL
Boresight Menu
The BORESIGHT function allows the user to change the position of the reticle in the display.
NOTE:
Remember that the center of impact on the target shifts in the opposite direction from the
direction that the reticle shifts. So, to bring the center of impact to the right/left and up/down,
you must shift the reticle to the left/right and down/up, respectively.
Figure 2-20 shows the boresight screen.
> EXIT
WINDAGE <> 10
ELEVATION <> -5
BORESIGHT
FIGURE 2-20. BORESIGHT MENU
To control reticle shifting, check the running reticle center coordinates, which are printed in the
lower left hand corner of the display.
NOTE:
For display coordinates, the origin is the center of the display. The running coordinate of the
reticle is the number of incremental shifts of the reticle from the center of the display. The
negative (-) sign appears before the displayed number when the reticle shifts left or down. The
point of impact (POI) on the target shifts right or up, respectively).
Push the LEFT and RIGHT buttons to adjust for windage. Moving the reticle in the positive (+)
direction (to the right) will move the POI to the left. Moving the reticle in the negative (-) direction
(to the left) will move the POI to the right.
Push the UP and DOWN buttons to adjust for elevation. Moving the reticle in the positive (+)
direction (up) will move the POI down. Moving the reticle in the negative (-) direction (down) will
move the POI up.
Every time one of these buttons is pushed, the reticle shifts a single pixel increment corresponding
to the minimum boresight correction value, and the point of impact on the target moves according
to the specified windage/elevation boresight increment, in the opposite direction to that of the
shifting reticle.
Every time one of these buttons is pushed for 3 sec, the reticle will shift in increments of 4 pixels
until you release the button.
Hold down both the LEFT and RIGHT buttons to reset to zero azimuth and elevation. The reticle
will shift to the display center.
Enhancement Menu
The ENHANCEMENT menu (Figure 2-21) allows the user to take advantage of advanced signal
processing algorithms, in order to improve the quality of the picture that is being viewed under a
variety of different thermal environments.