AGM Global Vision ANACONDA Series, User Manual

Page: 17 / 40

17 Anaconda
USER MANUAL
2.1.6 FASTENING THE WIRELESS REMOTE CONTROL TO A WEAPON
Using Velcro
®
tape (A, Figure 2-10), fasten the remote control (B) to your weapon in an easily
accessible place (e.g., on the front of the rifle stock).
If your rifle has a Picatinny or Weaver rail on the front end, you can use the Picatinny adaptor for
the wireless remote (C). Install the adaptor onto the rail (D). Insert the remote control unit into the
adapter.
2.1.7 INSTALLING ADDITIONAL EQUIPMENT
Use the side Picatinny/Weaver rail to install any additional equipment, such as the AGM HD Video
Recorder, WiFi Attachment, or the Extended Battery Pack.
2.1.8 CONNECTING AN ADDITIONAL EQUIPMENT
CAUTION:
Turn off the Anaconda before removing the batteries or connecting/disconnecting any external
equipment.
Remove the connector protective cap (see Figure 1-2).
Connect a cable of the external 5V battery bank to the Anaconda Micro-USB connector.
Connect a cable of Digital Video Recorder, WiFi Attachment, or the Extended Battery Pack to the
Anaconda S620 universal connector.
Use the video cable plug (A, Figure 2-12) to connect an external video recorder/monitor/TV to the
Anaconda. Connect the video cable plug (C) to the Anaconda S620 universal connector.
FIGURE 2-10. WIRELESS REMOTE CONTROL
A
B
B
C
D
FIGURE 2-11. HD RECORDER INSTALLATION