Agilent Technologies U1840A Medalist sj5000, Hardware Manual

Page: 120 / 192

10-4 Agilent U1840A Medalist sj5000 Hardware Manual
10
Setting Up Barcode Readers
3
When prompted to connect to the MS-4 barcode reader
immediately, click
No
.
4
Open the standard MS-4 ESP setup file
C:\Installation\Barcode\MS4-1.esp.
5
When asked again to connect to the MS-4 barcode reader,
click
Yes
.
6
Select
RS232
protocol.
7
Select the COM port that you noted in the previous
procedure, and click
Connect
.
8
Click
Send/Recv
>
Send to Reader
>
Send and Save
.
This will download the parameters from MS4-1.esp into the
barcode reader and save them in the flash ROM permanently.
The barcode reader will emit a long beeping sound, and
disconnect and reconnect again. This completes the setup file
download.