3
LAN Configuration
TCP/IP Parameter Configuration
Agilent InfinityLab ELSD User Manual
32
3
From the left menu, select
Network
to configure the TCP/IP settings.
The detector can be configured to:
•
obtain an IP address automatically (DHCP),
•
use a static IP address,
•
change Hostname (Advanced Network settings).
4
To use a static IP address, select
Use the following IP address
.
5
Enter the module’s
IP Address
,
Subnet Mask
, and
Default Gateway
address and
click
Apply
.
6
Select
Apply
again to confirm the changes.
7
Select
Logout
to close the session.
8
Restart the module for the new TCP/IP settings to be implemented.
NOTE
Contact your system administrator for assistance on configuring the detector’s
network settings.
NOTE
Changes to the TCP/IP parameters, other than those described, could render the
ELSD inoperable.
