manualshive.com logo in svg

Agilent Technologies G1323A, User Manual, Page: 56 / 170

Share
Download
Agilent Technologies G1323A User Manual Download Page 56

56

1200 Series Handheld Control Module Users’s Guide

2

Working with the Control Module

Printing Screens

Print Logbooks

Using the 

m

 (menu) key to show the context menu in the System screen allows 

you to choose the Print Logbook function. In the following dialog you can also 
configure the printer using the 

Setup

 button [

F8

]. The 

Spooler

 button [

F7

] 

enables you to delete print jobs if several jobs are on the stack. Additionally 
you may choose the number of copies to be printed.

In the 

Records

 screen you can choose the 

Print

 button [

F6

] to create a 

Configuration Report including the modules’ product, serial and firmware 
version numbers together with the operation time. This button is also 
available from the System Log, Error Log, Main Log and EMF windows.

Print Method

The current method settings can be printed out using the 

Print

 button [

F6

] in 

the 

Method

 screen. The print dialog as described above will appear. This will 

print all method settings excluding vial range information.

Print Timetable

Pressing the 

m

 (menu) key in the Timetable screen allows you to choose Print 

Timetable. This will lead to the regular print dialog.

Print Sequence

Entering the 

Sequence

 screen and pressing the 

m

 (menu) key offers the Print 

Sequence option.

Print Injector Program

From the Autosampler 

Settings

 screen press the I

nj. Program

 button [

F3

] to 

enter the 

Program

 screen. Via the 

m

 (menu) key you have the option to print 

out the program.

Summary of Contents for G1323A











































































































































































Reviews:

No comments