Agilent Technologies FieldFox N9912A, User Manual

Page: 157 / 209

File Management 157
How to move the cursor:

Use the rotary knob to move the cursor along the same row. The cursor will
change rows when it comes to a row end.

Use the
▲|▼
arrows to move the cursor up and down between rows.
When the selected keyword is complete:

Press
Done
to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.

Press
Cancel
to close the labeler without saving changes.
Prefixes for Filenames
A prefix is used as a default filename to which characters can be added. The
prefix can be customized, and quickly enabled or disabled. When enabled, the
current prefix is automatically entered as the start of a filename when
performing a Save operation.
How to enable and disable the current Prefix

Press
Save/Recall 9
.

Then
More
.

Then
Prefix ON OFF
The current selection is underlined.
How to edit the current Prefix

Press
Save/Recall 9
.

Then
More
.

Then
Prefix
.

Then choose from the following:
o
Press
Select
to add the cursor character to the end of the Prefix.
o
Press
Backspace
to erase the last character from the end of the Prefix.
o
Press
Clear
to erase the Prefix.
o
The preselected keywords (File, Site, and so forth) can be selected just like a
single character. These keywords can also be edited. See
Edit Keywords.
How to move the cursor

Use the rotary knob to move cursor on the same row.

Use the
▲|▼
arrows to move the cursor up and down the rows.
When the Prefix is complete

Press
Done
to save the Prefix and close the labeler. This Prefix will exist on
the FieldFox until it is changed.

Press
Cancel
to close the labeler without saving changes.