Agilent Technologies E4419B, User Manual

Page: 64 / 205

2 Power Meter Operation
42 E4419B Power Meter User’s Guide
•
Use or to modify the digit on which the cursor is currently
positioned.
•
Use or to move to other digits.
8
To confirm your choice, press the appropriate frequency units.
9
Connect the power sensor to the signal to be measured.
10
You must set the display to the type of measurement you require. This can
either be a direct channel measurement, a ratio measurement of both
channels or a difference measurement between both channels. Use the
following key presses:
Press
, . Select the appropriate softkey for the
measurement you require, either , , , , or , then or
.
11
The measurement result is now displayed.
Example
To make a measurement on channel A using an Agilent E-Series power sensor.
The frequency of the signal to be measured is 100 MHz.
•
Disconnect the power sensor from any source.
•
Press .
•
Press .
•
Connect the power sensor to the POWER REF output.
•
Press , .
•
Press , . Use the , , , and keys to enter
100. Press .
•
Connect the power sensor to the signal to be measured.
•
The measurement result is now displayed.
Input Select
A B A/B B/A A-B
B-A
Zero A
Cal Cal A
A Freq
MHz