Agilent Technologies E4419B, User Manual

Page: 31 / 205

Getting Started 1
E4419B Power Meter User’s Guide 9
15
The information in this field is displayed on two lines and depends on the
combination of sensor type, sensor calibration table and
frequency
dependent offset table currently selected. Table 1-1 shows all the possible
combinations for the two lines of the display. Find the table entry which
matches your display and use the reference number in the left-hand column
to look up
Table 1-2 for the combination of sensor type and correction being
applied to the current measurement.
For example, the display shows:
50MHz
(
10,C)
This is equivalent to reference number 4 in Table 1-1 and when looked up in
Table 1-2 shows that:
•
the sensor type is 8480 series
•
a sensor calibration table is selected (
10
)
•
a frequency dependent offset table is selected (
C
).
Table 1-1
Relevant Softkeys in Various Mode of Operation
Reference
Number Upper
Display Line Lower
Display Line
1 CF:xxx.x%
2 CF:xxx.x% xxx.xyHz(a)
3 xxx.xyHz (nn)
4 xxx.xyHz (nn,a)
5 xxx.xyHz
6 xxx.xyHz (a)
Where “y” is the frequency multiplier (M or G), “nn” is the sensor
calibration table number and “a” is the frequency dependent off-
set table letter.