Agilent Technologies E4419B, User Manual

Page: 156 / 205

3 Menu Reference
134 E4419B Power Meter User’s Guide
•
Press this softkey to change a file name. First, use the and keys to
scroll between the displayed files. When the file name you require to change
is highlighted, press
. A pop-up window appears on the screen.
Use the , , , , and keys to change
the file name. To confirm your choice, press .
•
Press this softkey to accept your edited file name as a new name.
•
Press this softkey to insert an additional character. The character is
inserted prior to the one which is currently highlighted. A maximum of
12 characters can be used.
•
Press this softkey to delete the character which is currently highlighted.
The minimum number of characters allowed is 1.
•
Press this softkey to revert back to the original file name, ignoring your
editing.
•
Press this softkey to return to the measurement screen.
The softkey menu structured to this key affects the system setup and the
channel setup.
Press this key to access the “System/Inputs” menu. This menu allows you to
set up a variety of conditions for your power meter, for example: GPIB
address, serial interface parameters, sensor calibration tables, averaging, duty
cycle, range, offset, service. It also allows you to review errors.
•
Press this softkey to access a menu which allows you to select and configure
the remote interface, select the command set you want to use or obtain an
interface overview
Edit Name
Edit Name
Insert Chare Delete Chare
Enter
Enter
Insert Char
Delete Char
Cancel
Done
Remote Interface