Agilent Technologies 86121A, User Manual, Page: 112 / 240

Lists of Commands 4
-
45
:DISPlay:MARKer:MAXimum:NEXT Moves the marker to the signal with the clos-
est power level just below the power level of
the signal at the current marker position. I
:DISPlay:MARKer:MAXimum
:PREVious Moves the marker to the signal with the clos-
est power level just above the power level of
the signal at the current marker position. I
:DISPlay:MARKer:MAXimum:RIGHt Moves marker to the next higher wavelength
or frequency. I
:DISPlay[:WINDow]:GRAPhics
:STATe Turns the instrument display of the power bars
on and off. S
HCOPy Subsystem
:HCOPy:DESTination Selects either the external or internal printer. S
:HCOPy:IMMediate Starts a printout. S
MMEMory Subsystem
:MMEMory:STORe Creates a new file and stores the present
data. I
SENSe Subsystem
:SENSe:CORRection:DEVice Configures wavelength measurements for nar-
rowband or wideband devices. I
:SENSe:CORRection:ELEVation Sets the elevation value used by the instru-
ment to compensate for air dispersion. I
:SENSe:CORRection:OFFSet
:MAGNitude Sets the power offset value used by the
instrument. S
:SENSe:DATA? Queries the time domain samples of the input
signal. I
STATus Subsystem
:STATus:{OPERation | QUEStionable}
:CONDition? Returns the value for the condition register for
the node. S
:STATus:{OPERation | QUEStionable}
:ENABle Sets the enable register. S
:STATus:{OPERation | QUEStionable}
:EVENt? Returns the value of the event register for the
node. S
Table 4-7. Programming Commands (4 of 5)
Command Description Code
Codes: S indicates a standard SCPI command. I indicates an instrument specific command.