Agilent Technologies 53150A, Service Manual

Page: 42 / 111

Chapter 1 Performance Tests
Test 4: Channel 2 Power Measurement
Assembly Level Service Guide 1-29
1
Test 4e: Channel 2 22 GHz to 26.5 GHz Power
Measurement (0 dBm)
NOTE
This test is appropriate for the Agilent 53151A and 53152A Counters.
1 Use the same test setup as described for Test 4a on page 1-25.
2 With the power output of the Microwave Amplifier still at 0 dBm
(adjust the power output of the Synthesizer, if necessary), set the
Synthesizer to the first frequency value listed for Test 4e in the
Performance Test Record on page 1-33 (22 GHz).
3 Record the actual power reading in the Performance Test Record.
4 Repeat steps 2 and 3 for the remaining frequency values listed for Test 4e.
5 Mark Pass or Fail for Test 4e in the Performance Test Record.
Test 4f: Channel 2 30 GHz to 46 GHz Power
Measurement (0 dBm)
NOTE
This test is appropriate for the Agilent 53152A Counter only.
1 Use the same test setup as described for Test 4a on page 1-25.
2 With the power output of the Microwave Amplifier still at 0 dBm
(adjust the power output of the Synthesizer, if necessary), set the
Synthesizer to the first frequency value listed for Test 4f in the
Performance Test Record on page 1-33 (30 GHz).
3 Record the actual power reading in the Performance Test Record.
4 Repeat steps 2 and 3 for each of the remaining frequency values listed
for Test 4f.
5 Mark Pass or Fail for Test 4f in the Performance Test Record.