Agilent Technologies 11896A, User'S And Service Manual

Page: 95 / 140

Programming
Instrument Specic Commands
:SCAN:TIMer:CLEar The :SCAN:TIMer:CLEar command resets the scan timer to zero . (The
commands *RST , INITiate:IMMediate , ABORT , and SCAN:RA TE also reset the
scan timer to zero .)
Command Syntax: :SCAN:TIMer:CLEar
Example: OUPUT 720;\:SCAN:TIM:CLE;"
:ST A T us:OPERation
:CONDition
The :ST A Tus:OPERation:CONDition query always returns zero for the
Agilent 11896A. It is a required command for IEEE 488.2 and is implemented
only for completeness .
Query Syntax: :ST A T us:OPERation:CONDition?
Example: OUTPUT 720;\:ST A T :OPER:COND?"
ENTER 720;Result
PRINT Result
:ST A T us:OPERation
:ENABle
The ST A Tus:OPERation:ENABle command sets the status enable register .
The :ST A Tus:OPERation:ENABle query returns a decimal value indicating the
number of bits set in the status enable register .
Command Syntax: :ST A T us:OPERation:ENABle < value >
Where: < value > ::= 0 to 255
Example: OUTPUT 720;\:ST A T :OPER:ENAB 4;"
Query Syntax: :ST A T us:OPERation:ENABle?
Returned F ormat: < value >< NL>
Where: < value > ::= 0 T O 255 (integer{NR1 format)
Example: OUTPUT 720;\:ST A T :OPER:ENAB?"
ENTER 720; Operation enable
PRINT Operation enable
4-30