Agilent Technologies 11896A, User'S And Service Manual

Page: 62 / 140

Using the Agilent 11896A
P olarization Controller
Using the Agilent 11896A
T o continuously sweep all polarization states
T o continuously and randomly sweep all polarization states , press 4
AUTOSCAN
5 .
The scan time clock is reset to 00:00. This indicates the present scan time
has been active 0 minutes , 0 seconds .
P olarization scanning is initiated at the current scan rate .
The elapsed scan time in minutes and seconds is displayed, along with the
current scan rate .
T o set the scan rate
T o change the scan rate , press , 4
SCAN RA TE
5 .
The current scan rate is displayed.
A djust the scan rate using the right-most knob .
T o select and lock-in the displayed scan rate , press 4 ENTER 5 .
N O T E
The scan rate returns to the previous value if an y ke y is pressed prior to pressing 4 ENTER 5 .
3-9