Agilent Technologies 11896A, User'S And Service Manual

Page: 103 / 140

V erication and Service Information
P erforming a V erication Check
V erify the L OCAL function 4. V erify the Local function by pressing:
4 LOCAL 5
The display will read:
HPIB ADDR:11
(The number 11 is used as an example , your display may be dierent.)
Turn the right-hand knob . The GPIB address on the display will
change over a range of 00 to 30.
V erify the SA VE and
RECALL functions
5. V erify the Save and Recall functions by pressing:
4
RECALL
5
A djust the right-hand knob until \0 " is displayed.
6. Press 4
ENTER
5 .
The display will change to:
500:500:500:500
7. Save these values by pressing:
4 SA VE 5
A djust the right-hand knob until \SAVE:1 " is displayed.
8. Press 4
ENTER
5 .
The display will change to:
500:500:500:500
9. Use the front-panel knobs to set each paddle position at 510.
10. Save the new position settings by pressing:
4 SA VE 5
A djust the right-hand knob until the display reads:
''S A VE:2''
11. Press 4 ENTER 5 .
5-4