AGI 15100SA, Assembly Manual

Page: 49 / 82

P1512161 R0 49
3.16. Assemble the Transport Arm
Attach the Transport Arm
1. Attach the transport arm mount plates (1) to the axle arms with 3/4" x 9" bolts (2) and 3/4" locknuts (3)
while making sure that there is enough space for the transport arm offset (4). See Figure 41 .
2. Orient the transport arm so it is overhanging to the side of the conveyor where the Swing Away conveyor
will be operating on.
3. Insert the transport arm offset (4) between the mount plate and axle arm.
Table 18. Transport Arm Offset Components
Item
Description Quantity
1 Transport Arm Mount Plate 4
2
3/4" x 9" Hex Bolt
4
3
3/4" Nylock Nut
4
4
Transport Arm Offset
1
Figure 41. Attaching Mount Plates and Transport Arm Offset
4. Slide the transport adjustment arm (5) onto the transport arm offset. See Figure 42 .
5. Lock the transport adjustment arm in place by inserting the 1/2" x 5" hitch pin (6) through the hole close to
the outer edge of the transport arm. Secure using a 3/16" x 3-1/4" hairpin (7).
4
2
1
3
SWING AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR 3. ASSEMBLY