P1512161 R0
75
3.22. Attach the Swing Away to the Main Conveyor
1. Lower the Swing Away spout onto the main conveyor hopper base.
2. Secure the support braces to the swivel top using bolts (5) and locknuts (8). See
Note
DO NOT over-tighten as these bolts act as pivot points.
Table 38.
Hopper Base Components
Item
Description
1
3/4" x 2" Hex Bolt
2
3/4" Nylock Nut
Figure 67.
Attaching Support Braces to the Hopper Base
3. Loosen the winch cable and attach the winch grab hook to swing away hopper chain.
4. Lift the Swing Away to transport position. Position the tab located on the side of the wheel base weldment
in between the turnbuckle jaws and secure in place using a 1/2" x 3" hitch pin and hair pin. See
SWING AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
