AGFA Drystar 5500, Reference Manual

Page: 146 / 266

146
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Establishing the image geometry reference values for general radiography
applications (DT 2 B and DT 2 C)
To establish the image geometry reference values, proceed as follows:
1
Print the QC general radiography test image or use the previously printed test
image.
You should obtain an image looking like this (without the dimensions A and B):
QC general radiography test image
Low Low Base + Fog Base + Fog Max (100%) Max (100%) High High Mid Mid
Identification Identification Identification Identification
Initials: __________ Initials: __________ Initials: __________ Initials: __________
Base + Fog: ______________ Base + Fog: ______________ Base + Fog: ______________ Base + Fog: ______________
Low Density: _____________ Low Density: _____________ Low Density: _____________ Low Density: _____________
Mid Density: _____________ Mid Density: _____________ Mid Density: _____________ Mid Density: _____________
High Density: ____________ High Density: ____________ High Density: ____________ High Density: ____________
Max Density: _____________ Max Density: _____________ Max Density: _____________ Max Density: _____________
Density
Difference (High - Low): ___________ Density
Difference (High - Low): ___________ Density
Difference (High - Low): ___________ Density
Difference (High - Low): ___________
Date: __________ Date: __________ Date: __________ Date: __________
Time: __________ Time: __________ Time: __________ Time: __________
Daily density tests Daily density tests Daily density tests Daily density tests
Weekly spatial resolution test Weekly spatial resolution test Weekly spatial resolution test Weekly spatial resolution test
Quality Control Test Image Quality Control Test Image
(Version 3
)
Sets of dots visible? Yes No Sets of dots visible? Yes No Sets of dots visible? Yes No Sets of dots visible? Yes No
Dimension B
Dimension A
1 2