AGFA Drystar 5500 Reference Manual Download Page 116

Page: 116 / 266

116

2900H EN 20071108

Advanced operation (Key-operator mode)

RYSTAR

5500/5503 R

EFERENCE

MANUAL

Locate and check on sight the print head resistor line.

Clean the print head resistor line.

Gently pass over the resistor line a few times with a lint free cloth, slightly moistened
with Isopropyl alcohol or Ethanol.

Do this in only one direction, i.e. from left to

right, without lifting the cloth

Be careful not to touch the print head resistor line.

Do not apply any pressure on the print head because this pressure may cause
damage on the interconnections underneath the print head.

Summary of Contents for Drystar 5500











































































































































































































































































Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands

AGFA Drystar 5500, Reference Manual

Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands