AGFA Drystar 5500 Reference Manual Download Page 125

Page: 125 / 266

125

2900H EN 20071108

Advanced operation (Key-operator mode)

RYSTAR

5500/5503 R

EFERENCE

MANUAL

When the contents of the floppy is copied onto the hard disk, the following
message asks you to insert the next floppy (if a next one is required):

Remove the floppy disk and insert the next floppy disk (‘disk x/y’) when
necessary. Press the Confirm key to continue.

The printer will copy the new software data onto the hard disk.

Repeat steps

and

until all floppy disks have been copied onto the

hard disk.

When all the files have been copied from the last floppy disk, the following screen is
displayed:

Remove the last floppy disk and press the Confirm key.

In case the software requires a reset, the following screen will be displayed:

Press the Confirm key to reset the printer.

In case the software requires no reset, the following screen will be displayed:

Disk x/y

Print head data

A:/<path><filename>

D:/<path><filename>

Summary of Contents for Drystar 5500











































































































































































































































































Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands

AGFA Drystar 5500, Reference Manual

Search results

Summary of Contents for Drystar 5500

Reviews:

Related manuals for Drystar 5500

Brands by name

Popular brands