Chapter 4: Assembling Sidewall Sheets
Figure 4-3
Caulking and bolting details (viewed from inside of the bin)
A
Strip of caulk
D
Second bolt
B
Bolt tightening sequence
E
Third bolt
C
First bolt
2. Start assembling the sidewall sheets end to end (overlapping the same way throughout), until the
ring is completed.
3. Install the correct size bin bolts with the bolt head and its neoprene washer to the outside and the
nut on the inside of the bin.
NOTE:
Do not tighten bolts until all the sheets are assembled and form a complete ring.
4. Tighten the bolts in sequence, starting from the center to the edge in both directions. This allows the
sidewall sheets to draw-up evenly.
NOTE:
Tighten from the nut side.
32
Pneg-4460A
60 Ft Diameter 40-Series Bins