Figure 8-20
Assembling the short center collar channel with the center collar channel clip
B
7/16 x 1-1/4 in. flange bolt (S-10250)
M
Short center collar channel (CTR-1142)
C
7/16 in. flange nut (S-10251)
N
1/2 in. bolt
L
Center collar channel clip (CTR-0156)
O
1/2 in. nut
8. Place all the assembled short center collar channels (L and M) aside to use later in this assembly
procedure.
9. Install the two long center collar channels (P) to the center collar channel clips (I) in the center collar
using the flange bolts (B) and the flange nuts (C).
NOTE:
Ensure that the cap plate holes are facing up and the clips are assembled to the outside of
the channel. Make sure to lift up the long center collar channels (P) from the channel clips (I)
while tightening the flange bolts (B) and the flange nuts (C).
108
Pneg-4460A
60 Ft Diameter 40-Series Bins