Afag 50113773, Assembly And Operating Instructions Manual

Page: 13 / 56

Safety instructions
Assembly instructions EN

SA-3 I SA-3-FL I SA-6 I SA-6-FL

Edition 01/2021

Rev. 4.5 13–56
2.8 General hazards / residual risks
Despite the safe design of the telescope spindle axis and the technical
protective measures taken, there still remain residual risks that cannot be
avoided and which present a non-obvious residual risk when operating the
telescope spindle axis.
Observe the safety instructions in this chapter and in the other sections of this
manual to avoid damage to property and dangerous situations for the personnel.
The telescope spindle axis is a fine mechanical unit and must be handled with
the necessary care and cleanliness during transport and storage as well as
when handling, setting up and assembling!
2.8.1 General hazards at the workplace
The telescope spindle axis has been built according to the state-of-the-art and
the applicable health and safety requirements. However, improper use of the
telescope spindle axis may cause the following hazards to the personnel:

danger to life and limb of the operator or third parties,

on the telescope spindle axis themselves,

property damage.
Always keep the assembly instructions ready at hand at the workplace!
Please, also observe:

the general and local regulations on accident prevention and environmental
protection.

the safety information sheet for the telescope spindle axis.
WARNING
Danger - Do not use in unsuitable environment!
The telescope spindle axes are designed for use in non explosive
atmospheres.

Do
not
use the telescope spindle axis in potentially explosive atmospheres!