Afag 50113773, Assembly And Operating Instructions Manual

Page: 45 / 56

Maintenance and Repair
Assembly instructions EN

SA-3 I SA-3-FL I SA-6 I SA-6-FL

Edition 01/2021

Rev. 4.5 45–56
9 Maintenance and Repair
9.1 General notes
The following maintenance activities can ensure optimum operating condition of
the telescope spindle axis.
9.2 Safety instructions for Maintenance and Repair
Also observe the safety instructions in

Chapter 2 „Safety instructions“ in
this manual.
WARNING
Danger of injury due to improper maintenance!
Improperly carried out maintenance activities can cause considerable
damage to property and serious injury.

Only use trained specialist personnel to carry out the activities.

Always wear personal protective equipment when carrying out maintenance
and repair work!
WARNING
Risk of injuries due to uncontrolled parts movements!
When the control system is switched on, the telescope spindle axis can make
unpredictable movements and cause injury or damage to property.

Before starting any work on the telescope spindle axis, switch off the control
unit and secure it from being switched on again.

Observe the operating instructions of the controller used!

Before starting any activities, switch off the media supply and secure it from
being switched on again!