Transport, Packaging and Storage
22 – 56
Assembly instructions EN
SA-3 I SA-3-FL I SA-6 I SA-6-FL
Edition 01/2021
Rev. 4.5
4 Transport, Packaging and Storage
4.1 Safety instructions for transport
The module can extend independently!
Fig. 3
Telescope spindle axis
Also observe the safety instructions in
Chapter 2 „Safety instructions“ in
this manual.
4.2 Scope of supply
The scope of delivery depends on the order of the telescope spindle axis
according to the order key in the technical catalogue or in the website.
Gearbox and motor must be ordered according to the order key.
In addition to the assembly and operating instructions, a safety information
sheet is enclosed with each telescope spindle axis.
This information sheet must be read by every person who carries out work
with and on the telescope spindle axis!
Unt
SA-3
Stck
SA-6
1 x
Module SA-3
1 x
Module SA-6
4 x
Centring bushing ø 7x3
2 x
Centring bushing ø 7x3
-
-
2 x
Centring bushing ø 9x4
1 x
Assembly instructions
1 x
Assembly instructions
CAUTION
Risk of injury when unpacking the telescope spindle axis!
The telescope spindle axis can be moved back and forth when it is not
fastened, causing crushing injuries to the fingers.
Carefully pack or unpack the telescope spindle axis.
Summary of Contents for 50113773
Page 54: ...54 56 Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 ...
Page 55: ...Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 55 56 ...
Page 56: ...56 56 Assembly instructions EN SA 3 I SA 3 FL I SA 6 I SA 6 FL Edition 01 2021 Rev 4 5 ...
