Aerotech SOLOIST, Hardware Manual

Page: 55 / 118

Soloist Hardware Manual Technical Details
www.aerotech.com 3-11
3.1.4. User Analog Output 0 (J104)
Analog output 0 is driven by a 16-bit DAC8531 digital to analog converter and buffered
by TL082 op-amps, producing a single-ended output voltage in the range of +/- 10 volts.
This produces a resolution of 305 uVolts per bit of the D/A. The output current is limited
to less than 50 mA. See Table 3-7 for the pin numbers. Note that the analog output is
referenced to J104-21 or 23. See Section 3.1.1. for the mating connector part number. A
second analog output is provided on the -IO option board.
Table 3-7. Analog Output Connector Pin-outs (J104)
Pin # Label Description In/Out/Bi.
22 Analog 0 Out Analog Output 0 Output
21 Common Common N.A.
23 Common Common N.A.
Figure 3-9. Analog Output 0 (J104)
10
18
19
26
1
9