Aerotech SOLOIST, Hardware Manual

Page: 16 / 118

Introduction Soloist Hardware Manual
1-6 www.aerotech.com
1.6 Electrical Specifications
The electrical specifications for the Soloist are listed in Table 1-2.
Table 1-2 Electrical Specifications
Description Units Soloist10 Soloist20 Soloist30
Main Supply 70 - 240 VAC
Input Volts
-AUXPWR
(1)
VAC
Input Frequency Main Supply Hz 50-60
Current (Max Peak)
Main Supply
Amps 42
Max Continuous
Input Power
Main Supply
Watts 1200 2400 2400
Supply Input Volts VAC 70-240
-AUXPWR Supply Input Frequency
(1)
Hz 50-60
-AUXPWR Supply Maximum Input
Power
(1)
Watts 100
-AUXPWR Supply Input Current
Maximum
(1)
A (RMS) .25
Output Voltage
(2)
VDC 15-350
Peak Output Current (2 sec) A (peak) 10 20 30
Continuous Output Current A (peak) 5 10 15
Peak Power Output
(3)
Watts 2300 4800 4800
Continuous Power Output
(3)
Watts 1100 2300 2300
Efficiency % 97
Current Loop Bandwidth
(4)
kHz 5 kHz max
PWM Switching Frequency kHz 20
Minimum Load Inductance mH
0.8 @ 160 VDC bus
(1 mH @320 VDC)
Maximum Optional Shunt Regulator
Dissipation (-S opt.)
Watts 40
Maximum Heat Sink Temperature
"
C
75
Heat Sink Size (typical) Volume 25.4 x 50.8 x 6.35 (1 x 2 x .25)
Weight (standard) lb (kg) 3.6 (1.63)
Notes:
1.
–
AUXPWR is optional
2. AC input voltage dependant. See 2.4.2.
3. Includes AC line droop
4. See the Digital Current Loop Parameters in the Soloist Help.