Aerotech SOLOIST, Hardware Manual

Page: 33 / 118

Soloist Hardware Manual Installation and Configuration
www.aerotech.com 2-13
2.7.2 Brushless Motor Connections
When you connect a brushless motor that is an Aerotech motor with Aerotech cabling, no
motor phasing process is required.


If you are using an Aerotech brushless motor with the Soloist, see the system
interconnection drawing in Figure 2-9 to determine the motor phase and Hall
connections.

If standard Aerotech brushless motors and cabling are not used, the motor must be
correctly phased, as described in the following section.
Motor
Frame
Black
White
Green/White & Shield
Typical motor cables used are the C13802 (BADC-MSO) or BADC-MSONT.
For full cable drawings, refer to your software CD ROM.
AC
Brushless
Motor
Red
Figure 2-9 Brushless Motor Connections