Npaq® Hardware Manual
Installation and Configuration
2.10.1. Analog Outputs (J10)
The analog output is set to zero when power is first applied to the system or during a system reset.
Table 2-41:
Analog Output Specifications (J10)
Specification
Value
Output Voltage
-10 V to +10 V
Output Current
5 mA
Resolution (bits)
16 bits
Resolution (volts)
305 µV
Table 2-42:
Analog Output Pins on the Analog I/O Connector (J10)
Pin #
Description
In/Out/Bi
6
Analog Output 0
Output
7
Analog Ground
N/A
8
Analog Ground
N/A
14
Analog Output 1
Output
15
Analog Ground
N/A
Figure 2-40:
Analog Outputs (J10)
76
Chapter 2
www.aerotech.com
