Aerotech A3200 Series, Hardware Manual

Page: 113 / 132

Maintenance Npaq® Hardware Manual
4.4. MXR Board Assembly
Figure 4-4 highlights the important components located on the MXR board assembly.
D A N G E R : Always disconnect the Mains power connection before opening the Npaq
chassis.
Figure 4-4: MXR Board Assembly
Table 4-10: MXR Board Jumper Selections
Jumper Setting Description
JP1
1-2 -5V power from external -12 V at J4-5
2-3 -5V power from external -5 V at J4-1
Table 4-11: MXR Board Test Points (where “x” represents the channel number)
TP Description TP Description
x00 2.5 V Reference Sine 5 Internal Use Only
x01 Sine after level shift 6 Internal Use Only
x02 2.5 V Reference Cosine 7 Internal Use Only
x03 Cosine 8 Internal Use Only
x04 A/D Select Sine 9 Internal Use Only
x05 A/D Clock Sine 10 Flash 1 Write Enable-N
X06 A/D Data Sine 11 Flash 1 Output Enable-N
x07 A/D Select Cosine 12 Flash 1 Chip Enable-N
x08 A/D Clock Cosine 13 Flash 2 Write Enable-N
x09 A/D Data Cosine 14 Flash 2 Output Enable-N
4 Digital Common 15 Flash 2 Chip Enable-N
4A Analog Common
www.aerotech.com Chapter 4 113