Aerco GF-110 Benchmark Series, Installation, Operation & Maintenance Instructions Manual

Page: 25 / 116

CONTROL PANEL OPERATING PROCEDURES
3-3
Table 3-1 Operating Controls, Indicators and Displays -
Continued
ITEM
NO.
CONTROL, INDICATOR
OR DISPLAY
FUNCTION
10 Menu Keypad Consists of 6 keys which provide the following functions for
the Control Panel Menus:
MENU
Steps through the main menu categories shown in Figure
3-2. The Menu categories wrap around in the order shown.
BACK
Allows you to go back to the previous menu level without
changing any information. Continuously pressing this key
will bring you back to the default status display in the VFD.
Also, this key allows you to go back to the top of a main
menu category.
▲ (UP) Arrow When in one of the main menu categories (Figure 3-2),
pressing the
▲ arrow key will select the displayed menu
category. If the
CHANGE
key was pressed and the menu
item is flashing, pressing the ▲ arrow key will increment the
selected setting.
▼ (DOWN) Arrow When in one of the main menu categories (Figure 3-2),
pressing this key will select the displayed menu category. If
the
CHANGE
key was pressed and the menu item is
flashing, pressing the ▼ arrow key will decrement the
selected setting.
CHANGE
Permits a setting to be changed (edited). When the
CHANGE
key is pressed, the displayed menu item will begin
to flash. Pressing the ▲ or ▼ arrow key when the item is
flashing will increment or decrement the displayed setting.
ENTER
Saves the modified menu settings in memory. The display
will stop flashing.
11
AUTO/MAN
Switch This switch toggles the boiler between the Automatic and
Manual modes of operation. When in the Manual (
MAN)
mode, the front panel controls are enabled and the
MANUAL
status LED lights.
When in the Automatic (
AUTO)
mode, the
MANUAL
status
LED will be off and the front panel controls disabled.
12
FIRE RATE
Bargraph 20 segment red LED bargraph continuously shows the Fire
Rate in 5% increments from 0 to 100%