AEMC 407 User Manual Download Page 61

Page: 61 / 84

The Cover Sheet is used as a cover sheet for the report and contains the
following frames:

•

Text Box

- containing the text “Trend Summary Report”.

•

Session Summary

- containing the name of the database used to

generate the report.

•

Session Summary

- containing operator information.

•

Session Summary

- containing test site information.

•

Session Summary

- containing operator comments.

•

OLE

- containing the AEMC

Instruments logo.

Using the associated properties window customizes each of these frames. The
properties window for a frame is displayed by selecting the frame, then selecting
the Properties command from the Frame menu.

The next worksheets are used to view the recorded trend channels and contains
the following frames:

•

Channel List

•

Channel Graph

•

Trend Summary

•

Meter

The following figure illustrates the Trend List worksheet.

Summary of Contents for 407





















































































Search results

Summary of Contents for 407

Reviews:

Related manuals for 407

Brands by name

Popular brands

AEMC 407, User Manual

Search results

Summary of Contents for 407

Reviews:

Related manuals for 407

Brands by name

Popular brands