51
3.20
DATA STORAGE
The Model 407 captures Trend measurements at a user specified interval.
The approximate number of data points that can be recorded with the memory
cleared
3.20.1 Trend Measurements
The Model 407 stores the measurement of each of the inputs. In addition, the
user can define the storage rate and type of measurement.
3.20.2 Recording with Memory Cleared
When a recording starts, the power meter will continue to record until one of the
following occurs:
•
The memory becomes full.
•
A manual press of the REC button for >2s is performed.
•
The battery voltage is not sufficient to keep the instrument powered.
3.20.3 Recording with a Partial or Full Memory
It is possible to have more than one recording provided there is sufficient
memory. The duration of the additional recording will depend on the sample rate
of the recording, amount of memory left and type of recording.
3.20.4 Memory Filled During Recording Session
If the memory becomes full, the
REC
indication on the display will blink. It will be
necessary to download and erase the memory before a new recording can be
started.
3.21
SOFTWARE INSTALLATION
3.21.1 Installing DataView
®
Minimum Computer Requirements:
•
Windows XP / Windows Vista & Windows 7 (32/64 bit)
•
256MB of RAM for Windows XP
•
1GB of RAM for Windows Vista & Windows 7 (32 bit)
•
2GB or RAM for Windows Vista & Windows 7 (64 bit)
•
80MB of hard disk space (200MB recommended)
•
CD-ROM drive
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Summary of Contents for 407
Page 1: ... 32 5 03 21 0 7 5 8VHU 0DQXDO 1 6 ...
Page 2: ... ...
Page 47: ...47 4 In the Bluetooth Devices window select Add ...
Page 83: ......
