- 31 / 50 -
BN 09 2671/01/01
We can distinguish 2 scenarios:
or
In the second case, you must start again.
For the user level, apply the same procedure.
6.7.3.2 System
setup
With the “supervisor” password, you have access to the following setup:
Battery selection:
to select battery type, number of cells etc…
Nominal settings
: to select mains, floating or high rate voltages, limit currents etc…
Meter selection:
to select °C or °F.
High rate options:
to allow manual high rate charge, activate the password protection etc…
Commissioning options:
to allow manual, activate password, select commissioning parameters.
Manual adjustment:
to switch the rectifier in the power supply mode.
Battery test options:
to select battery test parameters.
LVD function:
to select Low Voltage Disconnect parameters.
Temperature compensation:
to implement the battery voltage temperature compensation (option).
Communication options:
to select serial communication parameters.
Charge protections:
to set battery charge limits.
“User” and “supervisor” passwords setting:
to change “user” or “supervisor” passwords.
Output cable drop compensation
USER LEVEL
Next Change Exit
PASSWORD CHANGED
NOT THE SAME
