AEG BMT18, Original Instructions Manual

Page: 19 / 80

19
ENGLISH
TECHNICAL DATA BMT18
Type Multi-tool
Production code 4757 55 01 000001-999999 MJJJJ
Battery voltage 18 V
No-load speed 10000-20000 min
-1
Oscillation angle left/right 1.6/1.6º
Weight without battery pack 1.04 kg
Weight according to EPTA-Procedure 01/2014 (Li-ion 2.0 Ah ... 9.0 Ah) 1.46 ... 2.19 kg
Recommended ambient operating temperature -18...+50 ºC
Recommended battery types L18...
Recommended charger AL18G, BL1...
Noise Information
Measured values determined according to EN 62841. Typically, the A-weighted noise
levels of the tool are:
Sound pressure level / Uncertainty
Sound power level / Uncertainty
Wear ear protection!
L
pA
=81.0 dB (A) / K
pA
=3 dB(A)
L
WA
=92.0 dB (A) / K
WA
=3 dB(A)
Vibration Information
Vibration total values (triaxial vector sum) determined according to EN 62841.
Vibration emission value / Uncertainty
Sanding with sanding pad
Plunge cutting
Flush cutting
a
h
= 7.2 m/s
2
/ K=1.5 m/s
2
a
h
= 13.1 m/s 2 / K=1.5 m/s 2
a
h
= 12.4 m/s
2
/ K=1.5 m/s
2
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of
exposure.
7KHGHFODUHGYLEUDWLRQDQGQRLVHHPLVVLRQYDOXHVUHSUHVHQWWKHPDLQDSSOLFDWLRQVRIRZHYHULIWKHWRROLVXVHGIRUGLႇHUHQW
DSSOLFDWLRQVXVHGZLWKGLႇHUHQWDFFHVVRULHVRUSRRUO\PDLQWDLQHGWKHYLEUDWLRQDQGQRLVHHPLVVLRQPD\GLႇHU7KHVHFRQGLWLRQVPD\
VLJQL¿FDQWO\LQFUHDVHWKHH[SRVXUHOHYHOVRYHUWKHWRWDOZRUNLQJSHULRG
$QHVWLPDWLRQRIWKHOHYHORIH[SRVXUHWRYLEUDWLRQDQGQRLVHVKRXOGWDNHLQWRDFFRXQWWKHWLPHVZKHQWKHWRROLVWXUQHGRႇRUZKHQLWLV
UXQQLQJLGOH7KHVHFRQGLWLRQVPD\VLJQL¿FDQWO\UHGXFHWKHH[SRVXUHOHYHORYHUWKHWRWDOZRUNLQJSHULRG
,GHQWLI\DGGLWLRQDOVDIHW\PHDVXUHVWRSURWHFWWKHRSHUDWRUIURPWKHHႇHFWVRIYLEUDWLRQDQGQRLVHVXFKDVPDLQWDLQLQJWKHWRRODQGWKH
accessories, keeping the hands warm (in case of vibration), and organising work patterns.
WARNING! Read all safety warnings, instructions,
LOOXVWUDWLRQVDQGVSHFL¿FDWLRQVSURYLGHGZLWKWKLVSRZHUWRRO
Failure to follow all instructions listed below may result in electric
VKRFN¿UHDQGRUVHULRXVLQMXU\6DYHDOOZDUQLQJVDQGLQVWUXFWLRQ
for future reference.
MULTI-TOOL SAFETY WARNINGS
+ROGWKHSRZHUWRROE\LQVXODWHGJULSSLQJVXUIDFHVZKHQ
SHUIRUPLQJDQRSHUDWLRQZKHUHWKHFXWWLQJDFFHVVRU\PD\
FRQWDFWKLGGHQZLULQJ
Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Always wear safety goggles and a dust mask when sanding,
especially sanding overhead.
A suitable breathing respirator must be worn while sanding lead
paint, some woods, and metal to avoid breathing the harmful/toxic
dust or air.
The dust produced when using the product may be harmful to the
health of the operator and bystanders. Operator and bystanders
shall not touch and not inhale the dust. Wear a suitable dust
protection mask.
Do not machine any materials that present a danger to health, such
as asbestos.
Clamp the workpiece with a clamping device. Unclamped
ZRUNSLHFHVFDQFDXVHVHYHUHLQMXU\DQGGDPDJH
7KHSURGXFWZLOOUHVWDUWDXWRPDWLFDOO\LIVWDOOHG7XUQRႇWKHSURGXFW
immediately if it stalls. Do not turn on the product again while it is
still stalled, as doing so could trigger a sudden recoil with a high
reactive force. Determine why the product stalled and rectify this,
paying heed to the safety instructions.
Remove the battery pack before starting any work on the product.
SPECIFIED CONDITIONS OF USE
The multi-tool is intended to be used:
• for sanding and finishing metal, wood, plastics, or similar materials
using the sanding pad with the shaped abrasive sheets provided
• for scraping and plunge-cutting into non-ferrous metal, wood,
plastics, plasterboard, etc. using the provided metallic cutting
blades
• for cutting holes in walls to accommodate switches or power
sockets
• for removing grouting from between ceramic tiles
The product is intended to be operated indoors in dry, well
illuminated, and adequately ventilated conditions.
The product is not intended to be used on wet materials or surfaces.
Do not use the product for any other purpose.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
7RUHGXFHWKHULVNRI¿UHSHUVRQDOLQMXU\DQG
product damage due to a short circuit, never immerse your tool,
EDWWHU\SDFNRUFKDUJHULQÀXLGRUDOORZÀXLGWRÀRZLQVLGHWKHP
&RUURVLYHRUFRQGXFWLYHÀXLGVVXFKDVVHDZDWHUFHUWDLQLQGXVWULDO
chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
Do not dispose of used battery packs in the household refuse or
E\EXUQLQJWKHP$(*'LVWULEXWRUVRႇHUWRUHWULHYHROGEDWWHULHVWR
protect our environment.