Chapter 5 SCSI Drive Installation 73
Where:
d,d,...d represents a SCSI target ID.
The LUN for the specified ID is assumed to be 0.
(d,d),(d,d),...(d,d) represents a SCSI target/LUN ID pair.
“|” means “or”.
Using the /!SM Option
This option disables use of the IBM-supplied SCSI manager
(OS2SCSI.SYS) for the devices listed. To disable SCSI manager
support, the command line in CONFIG.SYS should look like this:
BASEDEV=OS2CAM.ADD /SM: d|((d,d),[d|(d,d)])
Where:
d,d,...d represents a SCSI target ID. The LUN for the specified ID
is assumed to be 0.
(d,d),(d,d),...(d,d) represents a SCSI target/l, LTN ID pair.
“|” means “or”.
Troubleshooting
• YOU CANNOT ACCESS THE SCSI DEVICE(S).
a. Make sure the SCSI device driver is installed properly.
b. Make sure each hard drive has power.
c. Verify that a BASEDEV = OS2CMD.ADD line exists in the
CONFIG.SYS file.
d. Verify that OS2CAM.ADD has been placed in the OS/2
directory.
e. Check the cable connections and the host bus adapter
installation.
• THE COMPUTER HANGS OR LOCKS UP WHEN
BOOTING AND THE SCSI DEVICES ATTACHED ARE
NOT SEEN BY THE COMPUTER SYSTEM.
