56 PCA-6157/6157L User's Manual
SCSIDISK.SYS
Features
• Support for removable media devices
• Supports non 512-byte sectors (1024, 2048, 4096)
• Supports multiple logical unit number (LUN) support
• Supports multiple host adapters (with DOSCAM.SYS or
MINICAM.SYS)
• Provides software write protection
• Can reserve drive letters
Description
SCSIDISK.SYS is needed when connecting more than eight drives
under DOS 5.0 and above. It is also required for drives with non
512-byte sectors and for removable drives if the user wants to
change the media. As illustrated in Figure 2-1 at the beginning of
this chapter, SCSIDISK.SYS works through MINICAM.SYS or
DOSCAM.SYS, so one of these drivers must also be loaded.
Installation
1. Use the COPY command to copy the appropriate drivers from
the SDMS SCSI Drivers disk to your boot disk.
2. The lines shown below must be added to your system’s
CONFIG.SYS file. The MINICAM.SYS or DOSCAM.SYS
driver is also required. List the drivers in this sequence:
DEVICE=C:<PATH> MINICAM.SYS
DEVICE=C:<PATH> SCSIDISK.SYS
