54 PCA-6157/6157L User's Manual
YES Go to b.
NO Power down all units in the system.
Remove all SCSI cables.
Boot system.
Is the SCSI BIOS seen during boot?
YES Power down all units in the system.
Reconnect and check all cable and power
connections.
Boot system.
Go to a.
NO Power down all units in the system.
Reseat the host bus adapter.
Check jumper settings.
Applicable jumpers may include:
IRQ
ROM address
SCSI chip address
DMA channel
Check CMOS setup.
Boot system.
Go to a.
b. Does the SCSI BIOS see the bootable SCSI drive?
Note:
When the computer boots, SDMS will scan the SCSI
bus. Devices found on the SCSI bus will be identified
as in the following lines:
ID 00 QUANTUM LP52S
ID 02 SONY CD-ROM
